veeresh k Posted May 28, 2018 Report Share Posted May 28, 2018 (edited) Hey everyone, I am trying to trace out the wave for the input and the output. I have tried for different ways,but not getting the desired results. One of the way was,i created 2 same signals with diff. name in testbench file and tried to trace ,but i was not successful in doing so. Any suggestions to do? Thank you. ? Ps:- I have attached the code through which m trying to trace.Plz,help me out with this.I have modified the code according to the errors,So thats the reason for using namespace sc::core while declaring fifo tracing input. ///////////////////////////////////////////// using namespace sc_dt; int sc_main(int, char* []) { sc_core::sc_fifo_out<int> output1; sc_core::sc_fifo_in<int> input1; //create the instance of the example example eg1("example_inst"); eg1.fifo(input1); eg1.fifo(output1); sc_trace_file*tf=sc_create_vcd_trace_file("fi"); sc_trace(tf,input1,"input"); sc_trace(tf,output1,"output"); sc_start(); if(not sc_end_of_simulation_invoked()) { sc_stop; } sc_close_vcd_trace_file(tf); return 0; } Edited May 28, 2018 by veeresh k Quote Link to comment Share on other sites More sharing options...
maehne Posted May 28, 2018 Report Share Posted May 28, 2018 You need to be more precise in your problem description! You did not post the exact error message you might have obtained nor is your code example complete and self-contained. Therefore, any answer by us is mostly based on wild guessing. Please note that you will only actually see traces in your VCD files if actually events happened during your simulation. If your sc_module example constitutes your Design Under Verification, you are missing at least in the posted code snippet some stimuli generator, which would trigger any events. I suggest you that you get familiar with C++ and then start with a good introduction tutorial / book on SystemC before pursuing your own modeling attempts. veeresh k 1 Quote Link to comment Share on other sites More sharing options...
veeresh k Posted May 28, 2018 Author Report Share Posted May 28, 2018 Hey maehne, Sorry for the incomplete post.Actually it was a follow up question which i had previously asked,so thats the reason for posting it up in this way. I am posting full code along with the errors. /////////ERRORS///////////////////////////////////// testbench.cpp: In function 'int sc_main(int, char**)':testbench.cpp:16:18: error: no match for call to '(sc_core::sc_fifo<sc_dt::sc_int<32> >) (sc_core::sc_fifo_in<int>&)'testbench.cpp:17:19: error: no match for call to '(sc_core::sc_fifo<sc_dt::sc_int<32> >) (sc_core::sc_fifo_out<int>&)'testbench.cpp:21:29: error: no matching function for call to 'sc_trace(sc_core::sc_trace_file*&, sc_core::sc_fifo_in<int>&, const char [6])' ////////////////////CODE///////////////////////////// #ifndef EXAMPLE_H #define EXAMPLE_H using namespace sc_dt; typedef sc_int<32> sc_int32; SC_MODULE(example) sc_fifo<sc_int32> fifo; //producer thread void producer_thread(); //consumer thread void consumer_thread(); SC_CTOR(example) : fifo(2) { SC_THREAD(producer_thread); SC_THREAD(consumer_thread); }; }; #endif ///////////////////////////////////////// #include <systemc.h> #include "example.h" using namespace sc_dt; void example::producer_thread() { int unsigned number_of_accesses = 4; for (int i = 0; i < number_of_accesses; i++) { sc_int32 value(i); cout << "[" << sc_time_stamp() << "] writing to FIFO value: " << value << ", free: " << fifo.num_free() << endl; fifo.write(value); cout << "[" << sc_time_stamp() << "] wrote to FIFO value: " << value << endl; wait(1, SC_NS); } } //consumer thread void example::consumer_thread() { sc_int<32> value(0); for (;;) { wait(4, SC_NS); fifo.read(value); cout << "[" << sc_time_stamp() << "] read from FIFO value: " << value << endl; } } ////////////////////////////////////////////////MAIN.CPP//////////////////// #include "systemc.h" #include "example.h" using namespace sc_dt; int sc_main(int, char* []) { sc_core::sc_fifo_out<int> output1; sc_core::sc_fifo_in<int> input1; //create the instance of the example example eg1("example_inst"); eg1.fifo(input1); eg1.fifo(output1); sc_trace_file*tf=sc_create_vcd_trace_file("fi"); sc_trace(tf,input1,"input"); sc_trace(tf,output1,"output"); sc_start(); if(not sc_end_of_simulation_invoked()) { sc_stop; } sc_close_vcd_trace_file(tf); return 0; } Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.